Argal

Argal Pumps Logo

AOD: Argal offers a wide variety of Air Operated Diaphragm (AOD) pumps ranging in sizes from 3/8” to 4”. This includes the world’s only series of 3” and 4” composite pneumatic pumps. Argal offers a variety of composite and metal alloys. This huge range of pumps can be used for a wide variety of applications including leachate, food grade, self-priming, seal less, explosion proof, and barrel pumps.

Argal AOD Pump

Min/Max connections – 1/4” to 4” / Max Head – 230 ft. / Max Flow – 340 USGPM / Max Temperature – 120° F


Argal Saturn ANSI PumpSaturn ANSI Pumps: The Argal Saturn series is made to ANSI B73.1 dimensions and can come in both short and long coupled configurations. This is one of the widest selections of ANSI pumps on the market and with so many material and sealing options is sure to have a solution in the standard ANSI dimensions the chemical market has come to use.

Min/Max connections – 1” to 20”
Max Head – 600 ft.
Max Flow – 4000 USGPM
Max Speed – 3600 RPM
Max Temperature – 115° F


Argal SaturnSub PumpSaturnSub: The SaturnSub series is a submersible pump made of fiberglass with an epoxy coated motor. This has the same casing as the Saturn ANSI pump series, but with a submersible motor.

Min/Max connections – 1” to 10”
Max Head – 600 ft.
Max Flow – 4000 USGPM
Max Speed – 3600 RPM
Max Temperature – 115° F


Route End Suction Pump: The Route series is a close coupled end suction pump. This is offered in a variety of materials and set ups. This pump can be sealed with single or doubled seals or magnetic drive.

Argal Route End Suction Pump

Min/Max connections – 1 1/4” to 2” / Max Head – 200 ft. / Max Flow – 400 USGPM / Max Speed – 3600 RPM / Max Temperature – 100° F


Argal Frontiera End Suction PumpFrontiera End Suction Pump ISO 2858: The Frontiera is a chemical pump in ISO 2858 dimensions. This pump is offered in a wide variety of configurations, including sealed and mag drive. This pump can be short or long coupled and is offered in a variety of materials.

Min/Max connections – 1” to 20”
Max Head – 150 ft.
Max Flow – 400 USGPM
Max Speed – 3600 RPM / Max Temperature – 100° F


Argal ZGE End Suction Pump

ZGE End Suction Pump ISO 2858: The ZGE series is an end suction pump offered in a variety of thermoplastics and fluoropolymers. These pumps are sized to ISO 2858 and have a metal extremal casing to allow for higher pressures and larger sizes.

Min/Max connections – 1 1/4” to 12”
Max Head – 550 ft.
Max Flow – 7500 USGPM
Max Speed – 3600 RPM
Max Temperature – 100° F


Argal TMB End Suction Mag Drive Pump TMB End Suction Mag Drive Pump: The TMB series is a small magnetically driven pump with hose or threaded connections.

Min/Max connections – 3/4” to 1”
Max Head – 35 ft.
Max Flow – 20 USGPM
Max Speed – 3600 RPM
Max Temperature – 90° F


Argal Prima TMP End Suction Mag Drive PumpPrima TMP End Suction Mag Drive Pump: The Prima TMP series is a close coupled magnetically driven pump with a variety of material options including one that allows the pump to run dry.

Min/Max connections – 3/4” to 1 1/4”
Max Head – 60 ft.
Max Flow – 60 USGPM
Max Speed – 3600 RPM
Max Temperature – 105° F


Argal KGK Vertical Column PumpKGK Vertical Column Pump: The KGK series of vertical column pumps is one of the most versatile lines of vertical column pumps in thermoplastics available on the market.  These pumps are offered in a myriad of materials, lengths, vapor seals, etc. With lengths offered up to 13’ deep and no wetted parts made of metal theis may be the largest line of vertical column pumps in the world.

Min/Max connections – 1 1/2” to 5”
Max Head – 250 ft.
Max Flow – 1200 USGPM
Max Speed – 3600 RPM
Max Temperature – 90° F


Argal Equipro Vertical Column PumpEquipro Vertical Column Pump: The Equipro series is a close coupled vertical column pump. This series can be both cantilever shaft or with bearings and is offered in lengths up to 6 ft. This is a cost effective vertical column pump with many different material options and arrangements.

Min/Max connections – 3/4” to 2”
Max Head – 180 ft.
Max Flow – 170 USGPM
Max Speed – 3600 RPM
Max Temperature – 90° F


Argal Nesk PumpNesk: This range is a vertical shaft pump for installations outside of tanks or as a recirculation pump.

Min/Max connections – 2 1/2” to 5”
Max Head – 70 ft.
Max Flow – 1000 USGPM
Max Speed – 1800 RPM
Max Temperature – 90° F


Argal Rhino Self Priming PumpRhino Self Priming Pump: The Rhino series is a self priming thermoplastic pump that is magnetically driven.

Min/Max connections – 1 1/2”
Max Head – 85 ft.
Max Flow – 90 USGPM
Max Speed – 3600 RPM
Max Temperature – 100° F


Argal Elk Self Priming PumpElk Self Priming Pump: The Elk series is a small self priming pump used as a transfer pump. This pump has reversible flow.

Min/Max connections – ¾”
Max Head – 85 ft.
Max Flow – 11 USGPM
Max Speed – 3600 RPM
Max Temperature – 100° F


Argal Hippo Self Priming PumpHippo Self Priming Pump: The Hippo series is a small self primer with single or double seals and a maximum of 17 ft of self priming.

Min/Max connections – 1” to 2 1/2”
Max Head – 90 ft.
Max Flow – 220 USGPM
Max Speed – 3600 RPM
Max Temperature – 100° F